Dry Ice Blasting Equipment Manufacturer: Cryogenesis
Skip Navigation Links
Home > Equipment Available > Pelletizer Model 1000

Dry Ice Blasting Equipment - High Pressure Pelletizer Model 1000

If you do not have a source where you can purchase the dry ice, you can manufacture it yourself using one of the two sizes of High Pressure Pelletizers that Cryogenesis manufactures. Cryogenesis has partnered with Ohio Engineering, a custom manufacturing company specializing in hydraulic press repair and radial piston pump repair, to offer the Pelletizer.

Model 1000 Pelletizer
Model 1000 Pelletizer
Model 1000 Pelletizer
  • The above Pelletizers are high pressure units that can produce rice or nugget size dry ice.
  • Some parts may be supplied by different vendors.
  • Equipment can be seen in operation two weeks prior to shipment at our facility.
  • Warranty one year on manufactured parts by Cryogenesis, other components carry manufacturer's warranty.

Pelletizer produces the blasting dry ice.

Model Number is capacity
Model 1000/455kg/hr
500/272kg/hr
01. Motor Hp complete with
02. Frame construction steel
03. One control panel box
04. Computer
05. (LED Screen Readout)
06. Vickers or Sun valves
07. Oil gear pump
08. Oil cooling heat exchange
09. Oil filter
10. Temperature and oil level
11. 30” by 8 “ hydraulic cyl
12. 30” by 6” hydraulic
13. 30” by 6 “ cold ends coated
14. 30” by 3 ½” cold end
15. Liquid CO2 injection
16. Cold end purge systems
17. Safety reliefs on each CO2 cyl
18. Over pressure switches
19. Stainless CO2 exhaust boxes
20. Hydraulic pressure gauges
21. Rice dies (.125”or .138”)
22. Safety /Deflection Hoods
23. Blue epoxy paint
24. CE approved components
30hp
3”
yes
yes
yes
yes
yes
yes
yes
yes
yes(2) cyl
no
yes
no
yes 2 req
yes
yes
yes
yes
yes
yes 2 req
yes
yes
yes
30 hp
3”
yes
yes
yes
yes
yes
yes
yes
yes
yes (1) cyl
no
yes
no
1 req
yes
yes
yes
yes
yes
yes 1 req
yes
yes
yes
More general information about the Pelletizer Model 1000.

Subject: Proper handling and storage of dry ice.
The following is a list of good practices required to supply customers with a quality dry ice product.
  1. When dry ice is extruded from the die on a dry ice machine every precaution should be made to keep the product from being exposed to atmosphere. This will become evident on high humility days when one can observe snow forming around the strains of dry ice. This will occur when the dry ice remains attached to the die for lengths greater then one foot. To prevent atmosphere from coming in contact with the dry ice, a hood and hood extension has been supplied. This hood should extend to within 3 to 4 inches from the top of the dry ice container. If you have these conditions you will notice a CO2 blanket being formed within the box and spilling over the edges of the dry ice containers. This is an ideal condition and one that should be required at all times. This spilling over also presents another problem with CO2 vapor now on the floor. We recommend installing an ID fan with a high cfm flow having its suction at floor level. (Example: Wall ventilators with shutters 30” fan 7,110-cfm ½ hp). The fan should be boxed in with the housing extending to the floor, stopping about 4 inches above the floor. This will handle any CO2 vapors.

  2. Pulling CO2 vapor from the hood or hood extension is not a good practice. Exhausting vapor in this matter will cause free air with moisture in it to come in contact with the dry ice, resulting in a poor quality product.

  3. All boxes should be dry, with no trace of water and no cracks in the inside.

  4. To seal the box place a 48” wide by 10-mill plastic over box before placing lid on. Then use an 18” wide 10 mill material around lid a minimum of three times.

Dry Ice Cleaning Process

Dry Ice Cleaning Process